Extraordinary solutions.  

Accura External Rollers

Accura Nylon Rollers Sets include pre-installed covers and 2 stopsACCURA™ PRECISION NYLON CANTILEVER GATE ROLLERS
Professional fence contractors across North America have been praising the quality of our products...
"We were really impressed with the rollers. All our people like them…we have tried a number of manufacturer's rollers and agree this is definitely the one to go with."
Professional Fence Contractor - IA

Time saving features like covers pre-installed on every roller, included stops to protect the roller and cover, saving call backs for gates knocked out of alignment. Packaged as a full set, ready to mount straight out of the heavy duty packaging  is a time (and money) saver in the field.

NEW - Our Accura Rollers for Square Frame Gates featuring our new ProAction™ Technology. Our Patent Pending design features tapered sidewalls substantially reducing drag on square frame cantilever gates. With a roller for square frame gates that actually works well, you may want to reconsider your approach to cantilever gate design altogether!
Watch our video below to learn more:

Commented on ProAction ..."we ran a test on one of the gates (20ft Opening and 6ft high) and operated the unit Open / Close 1678 non-stop within a 60 hour period to test the performance of another component and the Rollers operated perfectly and showed no sign of wear"... Access Control Professional Australia
All roller sets come packaged 4 rollers with brackets and bolts per set. All rollers include pre-installed covers. Each set includes 2 reinforced stops and also include our ASTM protective panel bracket.

Available in the following sizes (or can be adapted to):
Post                Gate Frame
4" Rnd            2 3/8" Rnd
2 7/8" Rnd        "
3 1/2" Rnd        "
4 1/2" Rnd        "
6 5/8" Rnd        "
4" Sq                "

4" Sq                2" Sq
4" Rnd                "
2 7/8" Rnd          "
3 1/2" Rnd          "

Component Details

Roller – 2 3/8” (2 1/2") round or 2" Square graphite impregnated nylon roller is UV stabilized and a full 7" in diameter. The precision machined low friction surface helps extend the life of the gate coating. The high density of the nylon roller allows gates to roll with minimum effort. Accura rollers are a perfect match for automated gates to help extend the life expectancy of expensive gate operators.

Some others use smaller diameter rollers that don't roll as freely. A 6" diameter rollers uses as much as 26% LESS material to manufacture. Less dense materials that can lead to flat spots, or failing to turn the roller leaves seams from the molding process. All of these shortcuts cause excessive wear and tear on the system. Take a look at our comparison!

Bracket – for 4” posts are standard but 2 7/8" (3"), 3 1/2", 4 1/2" and 6 5/8" are also available. The heavy duty design is made from 5/16” (8mm) thick galvanized steel rather than cast aluminum or iron for long term performance and to eliminate cracking. Rather than a single vertical gusset we use a 3 way gusset for superior strength. The axle housing is 1/2” thick and penetrates the base. U bolts, nuts, washers included. The 1/2" set screw includes a locking nut.

While some take a "universal" approach to bracket design and simply switch U bolts for size differences and for both round and square. Given the loads these rollers are designed to take we take a very sparing approach to "universal". Square posts get brackets specifically designed for a square post...not simply a U bolt switch. In just a couple of circumstances we use the same bracket (4' round) with specially designed U bolts making the part fit 3 1/2" and 2 7/8" posts.

Axle – 1-1/8” (28mm) machined steel axle is galvanized for long life. Stainless steel snap rings on both sides securely retain the wheel. Machined set screw section in the axle allows for fine-tuned roller alignment.

Bearings – two 62/28 RS - rubber sealed bearings are pressed into both sides of the roller.

Nylon Dust Covers – protect the bearings on each side of the wheel.

Load Rating – 4000# reaction load.

Warranty – Five (5) Year Limited Warranty. See warranty certificate for details.

Cover – Pre-installed covers are included with every roller saving installation time and insuring that you always have them when you need them. UV stabilized black plastic covers are vented to allow moisture to drain so they work on either the top or bottom roller. Unlike some our cover is firmly held in position by the gusset, the set bolt and the axle end to prevent it from turning or sagging and dragging on the gate frame.

NEW! Gate Stops and bottom bracket  - Heavy 1/4" (6.3mm) steel are now gusseted to better protect the roller and covers during opening or closing. This is especially important on manually operated gates. Since the gate rolls so freely the weight of a heavy gate hitting the stop is transferred to the post rather than the cover or roller. Two are included in every kit at no additional charge. For automated gates our stops now are punched for a carriage bolt and each set includes a ASTM protective panel mounting bracket to make it easier to comply with ASTM 2200.
(Download Product Bulletin)


ASTM Nesting Latch EXCLUSIVE - Heavy duty latch is adjustable laterally from the face of the post to the center of the receiver from 4" to 8 1/2" for easy installation. The end of the receiver is approximately even with the post and recessed behind the mounting bolts in compliance with ASTM 2200 for automated gates. Square bolts can be substitued for use with 4" square posts. The steel gate guide comes with bolts and nylon locking nuts to protect aluminum gate frames. The guide can be welded to round steel gates or left off utilizing the open square pocket of the adjustable receiver.

Nesting Latch - Heavy duty latch is adjustable laterally from the face of the post to the center of the receiver from 3" to 8 1/2" for easy installation. The end of the receiver extends just 2 1/4" out from the post and is perfect for manually operated gates.

DDG Drop Bar Latch -
Heavy duty latch eliminates the need for a drop rod. Dual 10" x 1 3/4" strong arms are made from 5/16" (8mm) steel and provide generous center gate spacing tolerance. Fit either 1 5/8" or 1 7/8" gate frames.

(unpriced - contact us for wholesale to the trade pricing)

Shop Drawings:
    30830 - 4" Round x 2 3/8" round Accura Roller
    30854 - 4" Sq x 2" Sq Accura ProAction Roller
    30857 - 4" Round x 2" Sq Accura ProAction Roller
    30183 - ASTM 4" Rnd HD Nesting Latch
    30182 - 4" or 2 7/8" Rnd Nesting Latch

Warranty Certificate
Website Builder